Tolerances and Surfaces of plastic mold

Molding tolerance is a specified allowance on the deviation in parameters such as dimensions, weights, shapes, or angles, etc. To maximize control in setting tolerances there is usually a minimum and maximum limit on thickness, based on the process used. Injection molding typically is capable of tolerances equivalent to an IT Grade of about 9–14. The possible tolerance of a thermoplastic or a thermoset is ±0.008 to ±0.002 inches. Surface finishes of two to four microinches or better are can be obtained. Rough or pebbled surfaces are also possible.

home>plastic mold manufacturer>automotive plastic mold-1 
home>plastic mold manufacturer>automotive plastic mold-2
home>plastic mold manufacturer>automotive plastic mold-3
home>plastic mold manufacturer>automotive plastic mold-4