"We have received our shipment of the chair shells & I am happy with the quality.
I have not yet cut any shells in half to check the thickness etc, but certainly from a finish point of view they are very good"---Lindsay from Australia
"I think it is clear so far your service is better than most (fast reply, good technical knowledge, keen pricing, good communication, customer references)"
------Tim UK
"So far, I am very happy. They seem to fit together as I was hoping! quality also looks very good."----Marcus from Australia
" I received the package today as promised by you. I would like to say I am VERY happy with this work you have done for me and would like you to know that I will be continuing to work with you..." Raymond Canada
"you were easy to work with on getting the mold made and changes as well as tring other plastic material " ----Phil. Canada
Mission Statement:
To make more benefits for our customers via our quality products, excellent services and competitive price.
|
 |
Topworks Platic Mold manufacturer works with the following:
- Drawing exchange file:.
| 2D: |
.dwg .dxf .pdf |
| 3D: |
.igs .step .x_t .prt .sldprt.easm |
- Plastic material:
| ABS (Acrylonitrile Butadiene Styrene) |
PA (Polyamide) |
PA6 (Polyamide 6) |
PA66 (Polyamide 66) |
| PET (Polyethylene Terephthalate) |
PC (Polycarbonate) |
POM (Acetal) |
PP (PolyPropylene) |
| PVC (Polyvinyl Chloride) |
TPR (Thermoplastic Rubber) |
HDPE |
LDPE |
- Plastic mold base:LKM,Hasco
- Hotrunner:YUDO, Hasco
- Plastic mold steel:
AISI |
DIN |
STEEL NAME |
HARDNESS |
HEATBTREATMENT |
USE |
1040 |
1.1730 |
ASSAB760 |
13-18HRC |
/ |
plastic mold base,ejector plate,support pillar,stop pin etc. |
1045 |
K-100 |
1050 |
DAIDO P1 |
P20 |
1.2738 |
ASSAB 718 |
28-32 HRC |
/ |
plastic mold cavity and core insert |
1.2311 |
THYSSEN 2311 |
|
P20H |
1.2711 |
ASSAB 718 H |
35-38 HRC |
/ |
plastic mold cavity and core block |
THYSSEN 711 |
H13 |
1.2344 |
ASSAB 8407 |
190 HB
(12 HRC) |
48-52 HRC |
plastic mold cavity and core block ,sprue,slide,ejector pin etc. |
THYSSEN 2344ESR |
420 |
1.2083 |
STAVAX S-136 |
180-220 HB
(10-18 HRC) |
Mirrior polishing,HRC 52-54 |
Mirrior polishing steel or PVC plastic |
THYSSEN 2083 ESR |
PVC plastic,HRC 46-48 |
420H |
1.2316 |
S-136H |
32-34 HRC |
/ |
PVC,acidic plastic etc. |
THYSSEN 2316ESR |
BeCu |
/ |
mold max |
40-42 HRC |
/ |
good for cooling |
|
Topworks plastic mold covers the following industry:
Automobile Industry(gallery):
Inner trim,exterior trim,front bumper,rear bumper,panel,light
..
|
 |
 |
 |
|
| Electronic and machinery industry(gallery): |
 |
 |
|
 |
Household utility industry(gallery):
Chair,stool,bucket,flower pot,forks andknife,cap,cup,crate,basket,table...
|
 |
 |
 |
 |
 |
 |
| Blowing mold , preform mold and pipe fitting mold (gallery) |
 |
 |
 |
 |
Mold Center/ West District / Huangyan/ Taizhou Zhejiang / China 318020
Tel:0086 0576-8403 3930 fax:0086 576-8472 4622 cell : 0086 1596 865 2523 ( 7x24 Hrs English speaking)
|
